DIY Fringe Brass Necklace – Step By Step Craft Tutorial

Flowy fringe is in style, and we got you a fun and easy project thats perfect if you love bold jewelry and fiber. In a couple minutes you can make yourself a beautiful flowy piece to wear around your neck and add some spice to your outfit.

Materials you will need to craft the fringe brass necklace:

Pearl cotton thread
18 gauge brass wire
Ultimate adhesive or glue gun
4 Jump rings
Jewelry clasp
Jewelry chain
Measuring stick
Scissors
Jewelry pliers, cutters, round nose pliers

Step 1: brass cutting

Take the brass wire and cut 6 inches with your jewelry cutter.

Step 2: mold brass

With your hands mold the brass wire into a semi-circle. If you need help molding the wire you can wrap it on something round, like a jar or a can.

Step 3: use the piler carefully

Using the round nose plier, create a loop on both ends of the wire- carefully wrap the ends around the tip/middle of the round nose plier.

Step 4: cutting cotton

Take the Pearl cotton thread and cut in right in the middle and divide the thread into 4 different bundles.

Step 5: attaching thread

Now its time to attach the thread onto the brass wire. Take a bundle of the thread and attach it to the brass by doing a larks knot- Fold the bundle of thread and place it under the brass, the folded area should be a the bottom and the ends at the top. Bring both ends over the brass, heading downward. Then pass them under the folded area and pull firmly.

Step 6: add glue onto knot

Attach all 4 bundles onto the brass using a larks knot. Once you have attached all 4 pieces, take your glue or hot glue gun and drop a small amount of glue on the back of the knot, in-between the thread. Doing this well ensure that the thread won’t come loose.

Step 7: trim ends

Once the glue has completely dried, trim the ends of the fringe with a pair of scissors. You can decide how long of short you want the fringe to lay.

Step 8: attach fringe to the chain

Decide how long you want the necklace to lay and cut 2 pieces of the chain. Now attach the brass fringe to the chain by connecting the ends with a jump ring, and use the pliers to close the ring.