4 Most common problems in residential plumbing

Plumbing problems can be frustrating, but they don’t have to be. Knowing what the most common issues are can help you avoid them in the first place and prevent costly repair bills.

Homeowners face the four most common plumbing problems: leaking pipe joints, clogged drains, sump pump failure, and water heater problems.


If you are facing any of these issues, you must contact a plumbing contractor 

Leaking pipe joints

Leaking pipe joints are a common problem but can be easily fixed. Inspect the area around the suspected leak and look for signs of water. If there is water present, try tightening the connection or replacing it completely with a new section of tubing and fitting. Leaking pipe joints may also be caused by corrosion or rusting; in this case, replace all suspect parts with new ones.

If you want to prevent leaking pipe joints in your home, ensure that any pipes exposed to high temperatures (such as those found near furnaces) are properly insulated with foam or other material capable of preventing heat from escaping through them into your walls and ceilings. Also, consider insulating any exposed pipes outside on cold days when temperatures drop below freezing so they don’t freeze over during winter months!

Clogged drains

If you’re having issues with a clogged drain, there are several options for fixing it. Clogged drains are commonly caused by food particles and soap residue lodged in the pipes. If your drain is slow-moving and sluggish, this is the first thing to check, as it may be an easy fix.

If you need help with these methods or aren’t comfortable using them, then call a plumber! If the problem is major and you think it requires your drains to be replaced, contacting a plumbing contractor might be the best option. 

They can solve your problem quickly and efficiently so you can get back to life without worrying about dirty water flooding your home or ruining your flooring.

Sump pump failure

Sump pump failure is a common problem in residential plumbing. This can happen for several reasons, including power outages and sump pump seals failing due to wear and tear. When this occurs, you will likely notice water collecting around your basement floor or seeping through the cracks in your wall.

If not addressed immediately, sump pump failure can cause damage to your home’s foundation and lead to flooding your basement or crawlspace. The water flow may also be strong enough that it pushes back against any doors leading into or out of the room where it is located, and it may even begin eroding at the foundation walls themselves!

Water heater problems

Water heater problems are the most common problem in residential plumbing.

Water heaters can fail for a variety of reasons, including:

  • An accumulation of sediment in the bottom of the tank blocks airflow and causes overheating
  • Rust and corrosion that reduce efficiency or cause leaks (depending on where these problems occur)
  • Misuse by overloading it with too many people at once and not draining water from your hot water tank regularly

A properly maintained water heater will have fewer issues than neglected ones. The best way to ensure your water heater runs smoothly is to have it regularly serviced by an experienced technician who knows how to diagnose and fix problems.

The technician will check for sediment buildup, rust buildup, leaks, improper gas pressure settings (if you have gas), etc., so if any issues arise, they can be addressed right away rather than letting them get worse until they become more expensive to repair later on.

Conclusion

If you are facing any of these, you must seek a professional plumber’s help to fix the issues. 

The post 4 Most common problems in residential plumbing first appeared on My desired home.

©