Jewel Tone Pumpkin Votives



If you’re looking for a way to spice up your autumnal decor this year, then why not introduce an unexpected dark and moody teal blue to the mix? This deep jewel tone plays nicely with harvest colors like golds, burgundys and browns and seamlessly adds a cool relief to the otherwise warm landscape. Mini pumpkin votives are a snap to make and add a wonderful glow as the cooler Fall temps set in. Won’t these be lovely on the Thanksgiving tablescape?

Jewel Tone Pumpkin Votives

Jewel Tone Pumpkin Votives Tray

Jewel Tone Pumpkin Votives Wood tray

Jewel Tone Pumpkin Votives Top View

Jewel Tone Pumpkin Votives Materials

Materials:

  • Mini pumpkins
  • Pen or marker
  • Paring knife
  • Painter’s tape (optional)
  • Small spreader or spoon
  • Spray paint – I used Montana Gold in color Petrol
  • Votive candles

Jewel Tone Pumpkin Votives Draw Circle

1. Draw a circle, just slightly smaller than the diameter of your votive candle, around the pumpkin stem.

Jewel Tone Pumpkin Votives Cut with a Knife

2. Use paring knife to cut out circle/stem, by “sawing” along the pen line deep enough to cut through the pumpkin thickness. Then grab the stem and rock it back in forth to remove.

Jewel Tone Pumpkin Votives Scoop out the seeds

3. Scoop out the pumpkin seeds and flesh. Then rinse and dry the inside of the pumpkin to help delay rotting.

Jewel Tone Pumpkin Votives Spray paint

4. Next stuff the pumpkin with paper and spray paint the pumpkin in a well ventilated area. Apply 2 coats and allow each coat to dry before applying the next. Once fully coated and dry, remove the stuffing. Also, I wanted the stem to remain it’s natural color, so I taped it off before spray painting. Whether you choose to do this step or not is totally up to you. A fully color-blocked pumpkin would be pretty too!

Jewel Tone Pumpkin Votives Add Votive

5. Next, hover the votive over the top hole to determine if the votive will be a snug fit, or if you need to open up the hole a bit more. I cut the hole smaller than the votive initially, as I wanted to make sure I didn’t cut the hole too large. If the hole is too large your votive will fall through into the pumpkin. If you need to cut the hole a littler larger, use your paring knife to shave down the edges until you can snugly wedge the votive into the opening.

Once the votives are in the pumpkins, light them up and enjoy the autumnal glow!

Jewel Tone Pumpkin Votives Decor

Jewel Tone Pumpkin Votives Top Closer

You’re reading Jewel Tone Pumpkin Votives , originally posted on Homedit. If you enjoyed this post, be sure to follow Homedit on TwitterFacebook and Pinterest.

The post Jewel Tone Pumpkin Votives appeared first on Home Decorating Trends – Homedit.