How to Build a Decorative Window Frame From Just ONE Board

Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 2

Hey all, it’s Corey back from Sawdust 2 Stitches.  If you know me,  you know I go ALL out for the Holiday Season, seriously I allocate more square footage for my Christmas decorations than I do for both of my own children. It is seriously that bad.  I love decorating for the holiday  season… but my excitement seems to fizzle out for any other holiday.  So,  I came up with this cute, simple window frame build that would allow me to easily change out a simple holiday wreath, in an effort to make all the other holidays not feel so left out.  So far it is working out perfectly and I love it! Bonus: You don’t even have to hang a wreath in it to make it look pretty.  It looks great as a stand alone piece as well!

So,  lets dive in.

How To Build A DIY Decorative Window Frame From Just One Board For Eason Seasonal And Holiday Decor @Remodelaholic

How to Build a Decorative Window Frame

This post contains affiliate links for your convenience. Learn more here

SUPPLY LIST:

  • (1) 1″x 4″ x 8′ Standard Board**
  • Ribbon (if desired)
  • Wreath (if desired)
  • Weathered  Oak Stain
  • Flat White Paint
  • Candle Wax
  • Paint Brush
  • 1 1/4″  Kreg Screws

**As an alternate, you could build this from an inexpensive 1×3 and a 1″ square dowel, with minor adjustments to your cuts and measurements.

TOOLS RECOMMENDED:

  • Table Saw
  • Miter Saw
  • Drill
  • Kreg Pocket Hole Jig
  • Stapler (If adding ribbon)
  • Putty Knife (If distressing paint )

CUT LIST:

  • (x2) @ 24″
  • (x2) @ 13″

1″ x 3/4″ Board

  • (x1) @ 19″
  • (x4) @ 6″

Step 1:  Rip Down Board

You know what is awesome?  Is that you can get all the boards you need out of (1)  1″x 4″ standard pine board. Set your table saw to 1″  and rip down the board.  This will give you 2 boards,  approximately* 1″ wide and the other 2 1/2″  wide. ( It will actually be 2 3/8″  to accommodate  the saw blade width when ripping down the board.)

**As an alternate, you could build this from an inexpensive 1×3 and a 1″ square dowel, with minor adjustments to your cuts and measurements.

IMG 5704


Step 2:  Frame

To construct the outer frame you will use the (2)  24 1/4″  boards, and the (2) 13″ boards.  As you can see in the image below you will need to  drill pocket holes in both ends of both 13″ boards.

IMG 5706

Screw both boards together using 1 1/4″ kreg screws.

Rustic Window Frame By Sawdust2Stitches.com 9


Step 3:  Grid

For the center gird you will need to drill pocket holes in both ends of all the grid pieces. (4) @ 6″ and (1) @ 19 1/4″

IMG 5709

I would suggest marking the grid/board placements before you begin drilling.  It just makes it easier, and less room for error.

Rustic Window Frame By Sawdust2Stitches.com 10

Rustic Window Frame By Sawdust2Stitches.com 11


Step 4: Finish

Before starting on the painting/staining process I sanded down my entire window frame.

I wanted to give mine and old rustic look so I began by staining my frame using “Weathered Oak”  by Winwax.  I ended up doing two coats  in order to get it to the color I wanted.

DIY Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com

Once the frame is completely  dry I was ready to distress it.  Most common way to get the chippy pain look is by using either petroleum jelly or candle wax.  I prefer Candle wax, I feel like I have a little more control with it.

In order to distress it, I  used the edge of an old candle  to rub over various parts of the frame.  Basically  rub the candle wherever you  want the stain color to show through.

DIY Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 2 Next we add the paint!   I know some people swear by chalk paint, but I have found regular old flat latex paint works just as well for this. DIY Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 3  I applied the paint using a basically  ruined paint brush… haha,  an old used paint brush makes for a great  stiff bristle brush.  It made for a streaky application.   I literally  painted the whole thing in a minute, because I did not need to make it look pretty! DIY Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 4 Once the paint is dry I was ready to scrape off  some of the paint.  I use a putty knife and give the whole frame a quick once over.  The places where the candle wax was applied scrapes up really  easily!  Giving it that old chippy  paint look. DIY Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 5  DIY Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 6


Step 5: Accessorize

While I think that this window frame is adorable as-is,  it is the perfect  background for many seasonal options! By adding a simple ribbon it becomes an adorable backdrop for a wreath!

Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 6

To attach the ribbon I used a heavy duty stapler.

Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 7

Then all you need to do is add your favorite wreath. I have already used this as part of my Christmas decor, and now it showcases a spring wreath!  There really are no limits !Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com  Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 2 Rustic Window Frame By Sawdust2Stitches For Remodelaholic.com 5 If you want to see how I made this cabinet you can see the dresser transformation here.

Take Luck,

Corey


Looking for more of an old window style? Build this! 

How to Build a Decorative Window Frame From Just ONE Board

More easy seasonal decorating ideas:

Easy-swap holiday printable set

10 Free Holiday Printables Set From @remodelaholic

reversible seasonal pallet porch signs

How to Build a Decorative Window Frame From Just ONE Board

The post How to Build a Decorative Window Frame From Just ONE Board appeared first on Remodelaholic.

©

WordPress: 7.27MB | MySQL:68 | 0.206sec