I’ve had about five different variations of a pouf DIY saved on Pinterest for as long as I can remember! I finally decided to put my efforts toward one that would make a big impact (and not look homemade). Using pre-made, woven, rag rugs meant most of the work was already done! I was originally inspired by
When deciding on a rug style to use, look for something flatwoven. You want something woven tightly enough that it won’t fall apart with use, but that also has a little flexibility to it so you can fold those edges. Since we have a pink rug, I went with a neutral color and subtle design. Something neutral also means this pouf will work well in any other room of my house. Using two of the same rugs will lend a more polished look to your pouf, but don’t shy away from two different rugs in similar color schemes if you’re looking for something a bit louder. Supplies:
– two matching rag rugs measuring either 2’3″ x 6′ or 3′ x 6′ (like
– 3″ tapestry needle
– 20 yards or more of cotton cord
– straight pins
– poly-fil stuffing, old towels, etc. as filling
Since this is such a big project, I’m using these sample sizes to show you how to place the rugs before stitching them together. You’ll want to lay the sides of the rugs together that you want to be seen so that they are facing each other. Measure the overlapping parts so that they are all even and then add a straight pin to mark those spots on the top rug where they did overlap. Then add another straight pin to each of the corners of the rug on the bottom. These are reference points.
Slide the top rug to the right end of the bottom rug so that the reference point on the top rug and the bottom rug meet. You’ll start stitching from the bottom reference point up to the top. Directions on how to stitch the actual rag rugs together are detailed below.
Once you reach the top reference point, you’ll bend your shapes so that it becomes more 3D. Continue stitching the short edge of the top rug to the bottom rug until you get to the corner of the top rug. Then continue creating your 3D shape by matching up the edges as you go. Ensuring you’ve measured them and marked your reference points evenly, you shouldn’t have any uneven edges to stitch together.
Before you start stitching your rugs together, thread your needle with about 10 feet of cotton cord so that it doubles up. This will ensure your rug is held together well. Start stitching together the two rugs by stitching them together at the first reference point and tying a double knot through both rugs. As you stitch through both rugs, make sure you stitch under the thicker weft rows (the white fabric in this shot) while also stitching through the first 2-3 warp rows (the cream colored yarn). Then stitch in between each of the weft rows (shown above) while stitching through the warp rows. Stitching along so close to the edges, and with a tight stitch, will ensure you don’t lose too much surface area in the seam when you turn things right side out.
Continue stitching things together, tying an extra double knot when your yarn is close to running out. Then start another length of 10′ and keep on trucking. Stitch all the way around until you get to the last section that needs stitched together.
Turn your pouf right side out, making sure to poke out your corners and bend back your seams. Then stuff in as much of that stuffing and those old linens as you can to make sure you have a sturdy, rectangular shape.
Finish stitching up the rest of your pouf by folding over the end seam for continuity’s sake and then stitching through the same places on the warp and weft.
Fluff that pouf into submission, make yourself a cup of tea/coffee/matcha and get cozy. You may have to share it with your fluffy friends.This pouf cost me about $35 to make and is easily the most popular spot in the house lately! Add a few coffee table books (