- Clear glass ornaments (Ours were from Hobby Lobby)
- Sharpie Oil Based Paint Pens in Silver and Gold (It’s important you find the oil based pens for permanency on glass.)
- Metallic Curly Ribbon
Paint Pen Ornaments
Ok, this is where you have to get a little creative! BTW, with a scrubby sponge meant for non stick dishware, you can scrub off this paint and start over if you mess it up, so don’t be too afraid. That having been said, we designated one ball just for practice.
You get the feel of these pens pretty quick, but if you haven’t worked with them before, play on some cardboard. They vary in how fast the paint comes out of the tip, depending on the pressure and amount of time you press down, so figure our your “flow” first.
After that, just go for a free form design! We were inspired for this project by one we have featured before from “Ben Franklin Crafts”.
Tip : We used a masking tape roll to hold onto the balls while we painted, let one side dry, then turned them over to do the other side.
Ribbon Filled Ornament
Ok, pretty self explanatory here. Cut metallic curly ribbon, and stuff it into a clear glass ornament!
Couple of tips…
- The openings of these glass ornaments can be sharp, so consider using a tool to help stuff in the ribbon.
- Cut the ribbon into short sections, about 6 inches long for easier “stuffing”.
- I pulled on the ribbon a little before putting it in the ornaments to keep it from looking too wound up.
- Fill the ornament with the ribbon, but don’t pack it in too tightly.
- I tied a little ribbon onto the top for fun.
Here’s the finished product!
This was really fun, and they sparkle under the Christmas lights!