If your homemaking mantra, like mine, is “Never enough houseplants,” then you might also be ever on the lookout for fun, new planters to hold your green babies. Am I talking about you? Yeah? Well then, this might be the perfect DIY project for you!
Generally I have good luck finding nice pots or vases at thrift stores and flea markets, and I’ll occasionally splurge on something I really like from favorite shops like West Elm, but lately I’ve been exploring easy DIY options to create unique planters I just haven’t been able to find in stores. You may have seen my recent lucite plant stand project, which was so easy and nice looking that I just had to translate the idea over to a planter too! And here she is. Lookin’ mighty fine, if I do say so myself.
*I lightly sanded and restained the cones I received in order to better match the bowl. I always have a variety of wood stains on hand, so buying stain for this project wasn’t an issue for me. If I didn’t have stain options at the ready, I would’ve been happy enough to leave them as they came.
Step One: Situate the wooden cones equidistant on the edge of the bowl’s bottom. Mark their placement with masking tape. This will make it easy for you to perfectly place the cones during the next step when time is an issue.
Step Two: Squeeze out an even amount of the two epoxy ingredients from the tube onto a disposable surface. Quickly mix them together with a disposable stir stick, then goop some epoxy onto the flat edge of the cones/feet. Spread the epoxy lightly and evenly, then press the feet into place on the bottom of the bowl. The epoxy will set up very quickly, so you don’t have much time to fuss here. Hence the taping from the previous step.
Make sure to immediately remove the masking tape, lest any of the epoxy set up over top of it!
If your wood bowl is not already sealed, I definitely recommend lightly sanding and spraying down the bowl with polyurethane to make it waterproof. You may choose to drill drainage holes into the bottom of this planter, in which case I would recommend sealing the wood inside the holes with polyurethane as well. If you don’t, you risk rotting the wood as it becomes soaked with water.
I cut down the sides of a fancy plastic self-watering pot to fit inside this planter so the water could drain into the saucer inside of the wooden bowl. I bought two plastic pots to try out, and one ended up being the perfect size! Using this interior planter is great for the succulents I’m using and certainly is a lot easier than dealing with drainage holes in the wooden bowl itself. If you are planting something like pothos that doesn’t need soaking and ample drainage, I wouldn’t worry about drainage holes. Just don’t overwater it.
This footed planter is a nice size for a table centerpiece, and the contents can be changed up depending on the season. And hey, if you feel really crafty, why not paint it a fun color? I have a feeling a little paint job may be in this guy’s future, but for now, the wood finish provides the perfect cozy touch for the fall and winter seasons. –Mandi