I know we’re barely through Spring yet but is it too early to start thinking about Ice-cream? Here’s a cute party hat concept for your celebrations in the the warmer months ahead…
Step 1: Apply acrylic paint to the curved side of the styrofoam half-sphere. The paint will soak into the styrofoam, so expect to do two layers! Make sure the paint color matches the cardstock as closely as possible. Let dry completely.
Step 2: Print the printable splatter template on the matching 8.5” x 11” teal, light yellow, or light pink cardstock. Cut out the design.
Step 3: Once dry, apply hot glue to the flat end of the half-sphere and adhere it to the center of its matching splatter-shaped cardstock.
Step 4: Cut a piece of satin ribbon from your spool. For most guests, 3-1/2 feet of ribbon should be long enough.
Step 5: Flip your party-hat-in-progress over and hot glue the satin ribbon to the flat side. Make sure to apply glue all the way to the edge of the cardstock so the hat will contour to the head when the ribbon is tied!
Step 6: Print the printable cone template on the 8.5” x 11” brown cardstock. Cut out the design.
Step 7: Curl the cardstock into a cone shape. Apply hot glue to the tab and hold together until the glue is cool.
Step 8: Apply hot glue to the inner rim of the cone and quickly and carefully place it slightly askew on the half-sphere. Hold the cone in place with a little downward pressure for 5-10 seconds. Your ice cream cone is ready for toppings!
Step 9: Take the remaining cardstock reserved for your sprinkles. Cut thin strips about 1 cm tall and 4 cm wide from each color.
Step 10: Apply a thin line of tacky glue to each sprinkle, and lay them onto the brim of the hat in a somewhat random fashion. We put somewhere between 8-10 sprinkles per hat.
Step 11: Try on your hat, take an ice cream break — and repeat!
Crafting by Naomi Julia Satake
Special thanks to little Maggie from JE Models!